printed/rabbitmq-queue-bundle

A helper wrapper for RabbitMQ producers and consumers

printed/rabbitmq-queue-bundle

A RabbitMQ wrapper bundle for Symfony that aims to improve your experience with consumers and producers. The bundle piggybacks off of the php-amqplib/rabbitmq-bundle bundle., _(*1)

Notable features

• Cancellable queue tasks
• Queue tasks completeness progress tracking
• An opinionated, zero-downtime deployment procedure, focused on supervisord
• (via php-amqplib/rabbitmq-bundle) Queue consumer's graceful max execution time
• Queue tasks reattempts

Setup & Dependencies

• PHP >=7.0
• https://packagist.org/packages/symfony/symfony ^3.4|^4.0
• https://packagist.org/packages/doctrine/orm ~2.5
• https://packagist.org/packages/monolog/monolog ~1.11
• https://packagist.org/packages/ramsey/uuid ~3.4
• https://packagist.org/packages/php-amqplib/rabbitmq-bundle ~1.6

We assume that you are familiar with the php-amqplib/rabbitmq-bundle configuration and setup., _(*2)

Special note for memcached users

Please open vendor/doctrine/cache/lib/Doctrine/Common/Cache/MemcachedCache.php file in your project and see whether you can find the following piece of code:, _(*3)

protected function doContains($id)
{
    return false !== $this->memcached->get($id)
        || $this->memcached->getResultCode() !== Memcached::RES_NOTFOUND;
}

If you do, then consider upgrading doctrine/cache version to at least 1.7.0, otherwise CacheQueueMaintenanceStrategy might be saying that the maintenance mode is up when there was any connection issues to your memcached server., _(*4)

Bundle configuration

printedcom_rabbitmq_queue_bundle:
  options:
    # Name of the service that acts as a default producer in RabbitMQ. See below this code snippet for details.
    default_rabbitmq_producer_name: 'default_rabbitmq_producer'

    # Name of the service that implements the queue maintenance mode. Use one of the following:
    #
    # 1. 'printed.bundle.queue.service.queue_maintenance.cache_queue_maintenance_strategy' (recommended)
    # 2. 'printed.bundle.queue.service.queue_maintenance.filesystem_queue_maintenance_strategy'
    #
    # To understand the difference, see the comments in the source code.
    queue_maintenance_strategy__service_name: 'printed.bundle.queue.service.queue_maintenance.cache_queue_maintenance_strategy'

    # Name of a cache service that implements the requirements outlined in the CacheQueueMaintenanceStrategy
    cache_queue_maintenance_strategy__cache_service_name: 'rabbitmq_queue_bundle_cache'

    # Name of the service that implements the New Deployments Detection feature. Choose one of the following:
    #
    # 1. 'printed.bundle.queue.service.new_deployments_detector.noop_strategy' - disables this functionality
    # 2. 'printed.bundle.queue.service.new_deployments_detector.cache_strategy'
    new_deployments_detector_strategy__service_name: 'printed.bundle.queue.service.new_deployments_detector.cache_strategy'

    # Name of a cache service that implements the requirements outlined in the CacheQueueMaintenanceStrategy
    new_deployments_detector_strategy__cache_service_name: 'rabbitmq_queue_bundle_cache'

    # Exit code used to exit a worker when it's detected that it's running old code
    consumer_exit_code__running_using_old_code: 15

    # With tools like supervisord, it's important to have consumers running without exiting for a specified amount of time
    # in order to prove that the script started successfully. This is a problem if a consumer manages to start, connect to rabbitmq 
    # and fail due to exception being thrown during execution of the task faster than the specified amount of time. The following
    # option makes the consumer not fail too fast. You essentially want to put your supervisord's "startsecs" value here (in seconds).
    # Bear in mind that the underlying code will always add 1 second to whatever value you put here in order to compensate for
    # fraction of seconds that aren't taken into account during evaluating of how long the script has been running for. This means that
    # you just need to put the value from supervisord's config "as is" without worrying about race conditions.
    #
    # You can disable this feature by either setting this option to null or not mentioning this option at all. I.e. by default this option
    # is disabled.
    minimal_runtime_in_seconds_on_consumer_exception: 1

    rabbitmq_user: '%rabbitmq_user%'
    rabbitmq_password: '%rabbitmq_pass%'

    # Pass '/' or don't set this option if you don't know what rabbtimq vhost is.
    rabbitmq_vhost: '%rabbitmq_vhost%'

    # This is used only by commands that call the rabbit management api. You don't need to do 
    # anything with this key if you don't use those commands.
    rabbitmq_api_base_url: 'http://%rabbitmq_host%:15672'

• rabbitmq-queue-bundle.default_rabbitmq_producer_name You are expected to have at least one RabbitMQ producer with the following config:

producers:
    default:
        connection:       default
        service_alias:    default_rabbitmq_producer

The value of the service_alias should be provided in the rabbitmq-queue-bundle.default_rabbitmq_producer_name parameter. That config creates a RabbitMQ producer which dispatches tasks to appropriate queues by queue names. This is also known as the "default" producer in RabbitMQ., _(*5)

Important notice: Use dedicated EntityManager for your consumers.

AbstractQueueConsumer should ideally use a dedicated and separate EntityManager to process QueueTasks. This is to prevent problems with flushing changes to the QueueTasks when the application's default EntityManager stopped being operational (e.g. due to the "Is already closed" error, or due to the entity manager's unit of work having been cleared)., _(*6)

To achieve this, use a multi entity manager configuration for the DoctrineBundle, and then supply the dedicated entity manager to the constructor of your consumers., _(*7)

Example configuration:, _(*8)

# DoctrineBundle configuration
doctrine:
  # (...)
  orm:
    # (...)
    default_entity_manager: default
    entity_managers:
      default:
        auto_mapping: true

      queue_consumer:
        mappings:
          Printed\Bundle\Queue:
            type: annotation
            prefix: Printed\Bundle\Queue\Entity
            dir: '%kernel.project_dir%/vendor/printed/rabbitmq-queue-bundle/src/Printed/Bundle/Queue/Entity'

# Registering your queue consumer e.g. in services.yml
acme.queue.consumer.my_queue_task1:
  class: 'Acme\Bundle\Queue\Consumer\MyQueueTask1QueueConsumer'
  arguments:
    - '@doctrine.orm.default_entity_manager'
    - '@validator'
    - '@monolog.logger'
    - '@Psr\Container\ContainerInterface'
    - '@printed.bundle.queue.service.service_container_parameters'
    - '@doctrine.orm.queue_consumer_entity_manager'
  tags:
    - container.service_subscriber

Usage

Assuming you have the configuration done for the previous bundles and running a basic Symfony demo application the steps below should be fairly easy to follow. Small changes can be made where needed but the examples are to help get the point across., _(*9)

Example rabbitmq.yml config

old_sound_rabbit_mq:
    connections:
        default:
            host: '%rabbitmq_host%'
            port: '%rabbitmq_port%'
            user: '%rabbitmq_user%'
            password: '%rabbitmq_pass%'
            vhost: '/'
            lazy: true
            connection_timeout: 3

            # this needs to be 2x of the heartbeat option
            read_write_timeout: 7200

            # don't forget that you should enable tcp keepalive in rabbitmq as well: https://www.rabbitmq.com/networking.html#socket-gen-tcp-options
            keepalive: true

            # keep this value high because https://github.com/php-amqplib/RabbitMqBundle/issues/301
            heartbeat: 3600

    producers:
        default:
            connection:       default
            service_alias:    default_rabbitmq_producer

    consumers:
        upload_picture: &consumer_template
            connection:       default
            queue_options:    { name: 'upload-picture' }
            callback:         upload_picture_service
            qos_options:      { prefetch_size: 0, prefetch_count: 1, global: false }
            graceful_max_execution:
                timeout: 1800
                exit_code: 10

        render_treasure_map:
            <<: *consumer_template
            queue_options:    { name: 'render_treasure_map' }
            callback:         render_treasure_map_service

Monolog

The consumer exposes a property $this->logger that will be an instance of monolog/monolog registered against Symfony with the queue channel. Feel free to handle the channel as you wish, but at the least we require channels: [queue] be added to your monolog config., _(*10)

Producing (Payloads)

We use classes known as payloads to contain data for the consumer (also known as worker). This class when constructed and given to the dispatcher will be first validated using symfony/validator and then serialise and stored in the database. The newly created record's ID is given to the RabbitMQ queue with the exchange defined in the abstract method getExchangeName. This allows for an easy interface for dispatching payloads without having to worry about the destination and keeping code up-to-date when exchange names change., _(*11)

namespace AppBundle\Queue\Payload;

use Printed\Bundle\Queue\Queue\AbstractQueuePayload;

use Symfony\Component\Validator\Constraints as Assert;

/**
 * {@inheritdoc}
 */
class ExampleQueuePayload extends AbstractQueuePayload
{

    /**
     * @Assert\NotNull()
     * @Assert\Type(type="integer")
     */
    protected $data;

    /**
     * {@inheritdoc}
     */
    public static function getExchangeName(): string
    {
        return 'example_exchange';
    }

    // public function getData()
    // public function setData()
    // ..

}

To dispatch this payload you can make use of the dispatcher class made available through this bundle. You can access it using printed.bundle.queue.service.queue_task_dispatcher against the container. For example .., _(*12)

class MyServiceClass
{
    private $queueTaskDispatcher;

    public function __construct(QueueTaskDispatcher $queueTaskDispatcher)
    {
        $this->queueTaskDispatcher = $queueTaskDispatcher;
    }

    public function doSomething()
    {
        // do something..

        $payload = new ExampleQueuePayload;
        $payload->setData($myData);

        $this->queueTaskDispatcher->dispatch($payload);
    }
}

```yaml services: MyServiceClass: class: MyServiceClass arguments: - '@printed.bundle.queue.service.queue_task_dispatcher', <sub>(*13)</sub>

## Consuming (Workers)

As mentioned in `php-amqplib/rabbitmq-bundle` your consumers need to be registered as services and given to the consumer definitions in the configuration. Its exactly the same here but we need a few arguments that are common across all consumers.

```YAML
services:
  app_bundle.queue.consumer.example_consumer:
    class: 'AppBundle\Queue\Consumer\ExampleQueueConsumer'
    arguments:
      - '@doctrine.orm.entity_manager'
      - '@validator'
      - '@monolog.logger.queue'
      - '@Psr\Container\ContainerInterface'
      - '@printed.bundle.queue.service.service_container_parameters'
    public: false
    tags:
      - container.service_subscriber

Note that the container.service_subscriber tag is required for the ServiceSubscriber Symfony feature link., <sub>(*14)</sub>

Then your work would look very familiar, just a few changes and enhancements:, <sub>(*15)</sub>

namespace AppBundle\Queue\Consumer;

use AppBundle\Queue\Payload\ExampleQueuePayload;

use Printed\Bundle\Queue\Exception\Consumer\QueueFatalErrorException;
use Printed\Bundle\Queue\Queue\AbstractQueueConsumer;
use Printed\Bundle\Queue\Queue\AbstractQueuePayload;

use Symfony\Component\HttpFoundation\Request;

/**
 * {@inheritdoc}
 */
class ExampleQueueConsumer extends AbstractQueueConsumer
{
    /**
     * {@inheritDoc}
     */
    public static function getSubscribedServices(): array
    {
        return array_merge(parent::getSubscribedServices(), [
            'some_service' => MySomeService::class,
        ]);
    }

    /**
     * {@inheritdoc}
     *
     * @param ExampleQueuePayload $payload
     */
    public function run(AbstractQueuePayload $payload): bool
    {

        //  You hava access to all the standard things ..
        $someService = $this->locator->get('some_service');
        $usefulParameter = $this->containerParameters->get('my_app.useful_parameter');

        $this->em->persist($entity);
        $this->logger->info('Oh noes');

        //  Setting a task response data.
        $this->task->setResponseData(['something' => true]);

        //  Do lots of things ..
        //  And a few more things ..

        return self::TASK_COMPLETE;

    }

}

A task must always exit with a boolean value, true meaning passed and false meaning it failed. To make this more verbose you have access to constants TASK_COMPLETE and TASK_FAILED which are simply those boolean values under the bonnet. When marking the task as failed the attempts count against the task is incremented before it is given back to the queue for another attempt. Each task will be given an attempt limit specified by the getAttemptLimit() method in the consumer. Feel free to override this but by default the limit is set to 10. In those rare cases where you know the task will forever fail and you do not want to let it use its remaining attempts you can throw the QueueFatalErrorException exception. The message will be logged to the usual logs and the attempt limit will be maxed, this will prevent the job from spawning anymore attempts., <sub>(*16)</sub>

Running these consumers is the same as the bundle mentioned: ./bin/console rabbitmq:consumer example_consumer -vv, <sub>(*17)</sub>

Maintenance and deployment

In order to gracefully bring down your queue or halt its progress we have the following console commands defined. This will allow for easy maintenance of the queue consumers/workers., <sub>(*18)</sub>

queue:maintenance:up
queue:maintenance:down
queue:maintenance:wait

In essence, queue:maintenance:up will prevent any new jobs from being processed by the workers. When a new job is being delivered to a worker, while the maintenance mode is up, then the worker will immediately exit with code 0. This is helpful if you are running this with something like supervisord because supervisord by default doesn't restart programs that exit with that status., <sub>(*19)</sub>

It's important to understand that the primary purpose of queue:maintenance:up is to prevent new jobs from being processed. That command is not for stopping/restarting workers (although it effectively happens most of the time). Please make use of the New Deployments Detection feature described below to restart the workers., <sub>(*20)</sub>

The queue:maintenance:wait will poll the database for running tasks, this command will only exit when none of the tasks are marked as running. The -r parameter will let you configure the number in seconds it waits to poll the database. Also as its a symfony command feel free to quelch the output -q in your deployment tools., <sub>(*21)</sub>

Then of course queue:maintenance:down will allow the queues to run again. Although you will need to manually restart them as they would have exited., <sub>(*22)</sub>

Before you disable the maintenance mode, you need to make sure all old idle workers are restarted. There are many ways of doing it. This bundle provides you with a way for all workers to quit when they detect that a new deployment has happened. This feature is called "New Deployments Detection" and requires you to call the queue:store-new-deployment-stamp-command with a string that can be used to compare deployments (timestamp is generally enough). Make sure you configure this bundle to actually use this feature., <sub>(*23)</sub>

Essentially you might have a build script looking like this:, <sub>(*24)</sub>

./bin/console queue:maintenance:up
./bin/console queue:maintenance:wait -q -r 10

# deploy code
# database migrations
# cache cleaning/warming

./bin/console queue:store-new-deployment-stamp-command `date +%s` 

./bin/console queue:maintenance:down
# "supervisorctl reread"
# "supervisorctl update"

As the tasks are stored in the database with all their payload data it is possible to spawn all the tasks again. This is handy if you need to upgrade or migrate your RabbitMQ instance. At this time we created the command for this (sorry) but it is easy enough to do by replicating the process you do initially to spawn a task but just loop over all the entries in the database marked as pending or status = 1. See the QueueTaskInterface for more information here., <sub>(*25)</sub>

Tips

RabbitMQ vhosts

Official docs, <sub>(*26)</sub>

If you use one RabbitMQ server to host queues for multiple of deployments of your app (e.g. hosting test, staging, regression environments all on one RabbitMQ server), this feature lets you do that without running into queue names' conflicts., <sub>(*27)</sub>

To make use of it, set the following options:, <sub>(*28)</sub>

1. old_sound_rabbit_mq.connections.default.vhost
2. printedcom_rabbitmq_queue_bundle.rabbitmq_vhost

Supervisord groups of processes.

Official docs, <sub>(*29)</sub>

This allows you to collect all queue consumers in one supervisord process group, which in turn allows you to start and stop them by using that group name and it allows you to run queue consumers from multiple of your app environments on one machine without running into name conflicts., <sub>(*30)</sub>

It's also the more proper way to stop your consumers, deploy your code, reread supervisord config and start your consumers. That replaces the "new deployment detection" feature of this bundle., <sub>(*31)</sub>

Queue tasks priorities

Official docs, <sub>(*32)</sub>

RabbitMQ offers a way to distribute and process queue tasks with different priorities. This bundle is aware of this feature and offers you a way to make use of it. See: AbstractQueuePayload::__construct(), the $queueMessageProperties argument., <sub>(*33)</sub>

One of the reasons why this feature is useful is a situation when you conclude that you have n consumers mostly doing nothing, but still occupying server's resources (RAM). You can reorganise your code to use a single queue consumer listening to a single, shared queue and processing queue tasks that vary in priority. This bundle doesn't offer any opinion on such implementation, however having a shared queue with 5 priorities: lowest, low, normal, high, highest is a sound setup., <sub>(*34)</sub>

Tests & Contribution

Sadly no tests right now, there isn't much too actually test. But if you have anything to contribute then please open a pull-request now. Just keep the code clean!, <sub>(*35)</sub>