piphp/gpio

A library for accessing the GPIO pins on a Raspberry Pi

PiPHP: GPIO

, _(*1)

A library for low level access to the GPIO pins on a Raspberry Pi. These pins can be used to control outputs (LEDs, motors, valves, pumps) or read inputs (sensors)., _(*2)

By AndrewCarterUK , _(*3)

Installing

Using composer:, _(*4)

composer require piphp/gpio, _(*5)

Or:, _(*6)

php composer.phar require piphp/gpio, _(*7)

Examples

Setting Output Pins

use PiPHP\GPIO\GPIO;
use PiPHP\GPIO\Pin\PinInterface;

// Create a GPIO object
$gpio = new GPIO();

// Retrieve pin 18 and configure it as an output pin
$pin = $gpio->getOutputPin(18);

// Set the value of the pin high (turn it on)
$pin->setValue(PinInterface::VALUE_HIGH);

Input Pin Interrupts

use PiPHP\GPIO\GPIO;
use PiPHP\GPIO\Pin\InputPinInterface;

// Create a GPIO object
$gpio = new GPIO();

// Retrieve pin 18 and configure it as an input pin
$pin = $gpio->getInputPin(18);

// Configure interrupts for both rising and falling edges
$pin->setEdge(InputPinInterface::EDGE_BOTH);

// Create an interrupt watcher
$interruptWatcher = $gpio->createWatcher();

// Register a callback to be triggered on pin interrupts
$interruptWatcher->register($pin, function (InputPinInterface $pin, $value) {
    echo 'Pin ' . $pin->getNumber() . ' changed to: ' . $value . PHP_EOL;

    // Returning false will make the watcher return false immediately
    return true;
});

// Watch for interrupts, timeout after 5000ms (5 seconds)
while ($interruptWatcher->watch(5000));

Further Reading

SitePoint published a tutorial about powering Raspberry Pi projects with PHP which used this library and shows a push button example with a wiring diagram., _(*8)

More Resources

PiPHP maintains a resource directory for PHP programming on the Raspberry Pi., _(*9)